Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang,MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods,MISUMI Indonesia do precautions measure. See detail information hereNomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
- MISUMI Home>
- Automation Components>
- >
- Locating Pins, Bushings>
- Locating Pins>
- >
- >
- SHD-SJPBPB1-2
-
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
- CommentsSaran
- Name (Optional)Nama (tidak wajib)
- E-mail Address (Optional)E-mail (tidak wajib)
- Tel (Optional)
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan PrivacyThank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy
- Volume Discount
MISUMI
MISUMI
- MISUMI×Locating Pins
- MISUMI×Locating Pins, Bushings
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
Post battery assembly process | |||||
SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
(i)Caution
- Click here for technical information such as cleaning effects, lineup for other cleaned products and other related information.
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
- The price list on this page is as of April 2023. For the latest price, please click the "Confirm Price" button after confirming the part number.
Part Number
Configured Part Number is shown.
SHD-SJPBPB1-2
- Drawing/Specifications
- 3D Preview
- Part Numbers
(Round)
(Diamond)
* The insertion guide is applicable to tolerance p6 only.
[ ! ] SUS304 products may not be polished and have no centering hole.
When D < 3
a = 0.5
d=D - 0.1
[ ! ] Relief dimensions are reference values.
When D ≥ 3
a=1.0
d=D - 0.2
P Fixed | P, L, B Configurable | Body Material | Cleaning Method | |||||||
Type | D Tolerance, Shape | Type | D Tolerance, Shape | [M] Material | [S] Surface Treatment | [H] Hardness | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
SL-SJP | [Round] BB (m6) BPB (p6) [Diamond] DB (m6)DPB (p6) | SL-SFP | [Round] BA (m6) BPA (p6) BG (g6) [Diamond] BD (m6)BPD (p6) DG (g6) | SUS304* | — | — | Degreasing | General environment | Anti-rust packing | General environment |
SH-SJP | SH-SFP | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
SHD-SJP | SDH-SFP | Electrolytic polishing + precision cleaning | ||||||||
SL-HJP | SL-HFP | SUS304 | Hard Chrome Plating | Plating Hardness: HV750 or more | Degreasing | General environment | Anti-rust packing | General environment | ||
SH-HJP | SH-HFP | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 |
* For P Fixed Type, it is SUS304 equivalent.
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.
Specification Table
Part Number | — | P | — | L | — | B | ||||
Type | D Tol. | D | ||||||||
Config. | ||||||||||
SL-SJP | BB | 6 | — | 10 | ||||||
SH-HJP | BPB | 8 | — | 12 | ||||||
SHD-SFP | BG | 10 | — | P12.02 | — | L10 | — | B3.2 |
■P Fixed Type
Part Number | P Selection | L | B | C | m | ℓ | (W) | |||||||||||||||||
Type | D Tolerance, Shape | D | D Dimension Tolerance | |||||||||||||||||||||
m6 | p6 | |||||||||||||||||||||||
SL-SJP SH-SJP SHD-SJP SL-HJP | [Round] BB (m6) BPB (p6) [Diamond] DB (m6)DPB (p6) [ ! ] Applicable when D ≥ 2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0.5 | 0 | — | |||||||||||||
2 | 3 | 4 | 4 | 0.5 | 1 | 1.2 | ||||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 2 | 1 | 1.5 | ||||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 6 | 1 | 3 | 1.8 | ||||||||||||||||
5 | 6 | 8 | 10 | 2.2 | ||||||||||||||||||||
6 | 8 | 10 | 8 | 3 | ||||||||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | 12 | 13 | 15 | 1.5 | 4 | 3.5 | |||||||||||||||
10 | 12 | 13 | 15 | 10 | 2 | 4 | ||||||||||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13 | 15 | 16 | 5 | ||||||||||||||||||
13 | 15 | 16 | 22 | 2 | 5.5 | |||||||||||||||||||
16 | 20 | 25 | 3 | 5 | 7 | |||||||||||||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 25 | 30 | 30 | 15 | 9 | |||||||||||||||||
■P, L, B Configurable
Part Number | P | L | B | C | m | ℓ | (W) | |||||
Type | D Tolerance, Shape | D | D Dimension Tolerance | 0.01 mm Increments | 1mm Increments | 0.1mm Increments | ||||||
m6 | p6 | g6 | ||||||||||
SL-SFP SH-SFP SHD-SFP SL-HFP | [Round] BA (m6) BPA (p6) BG (g6) [Diamond] BD (m6)BPD (p6) DG (g6) | 1 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 1.20 (1.50)Up to 3.00 (2.50) | 2·3 | 1.0 to 5.0 | 0.1 | 0.5 | 0 | 0.6 |
2 | 2.50 to 6.00 (4.00) | 2 to 6 | 1.0 to 15.0 (10.0) | 0.5 | 1 | 1.2 | ||||||
3 | 3.50 to 8.00 | 3 to 10 | 1.0 to 15.0 (10.0) | 2 | 1 | 1.5 | ||||||
4 | 0.016 | +0.020 +0.012 | -0.004 -0.012 | 4.50 to 8.00 | 3 (4)Up to 14 | 1.0 to 15.0 (10.0) | 1 | 3 | 1.8 | |||
5 | 5.50 to 10.00 | 5 to 15 | 1.0 to 15.0 (10.0) | 2.2 | ||||||||
6 | 6.50 to 10.00 | 5 to 15 | 1.0 to 30.0 (25.0) | 3 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 8.50 to 15.00 | 5 (6)Up to 16 | 1.0 to 30.0 (25.0) | 1.5 | 4 | 3.5 | |||
10 | 11.00 to 17.00 | 5 (10)Up to 20 | 3.0 to 30.0 (25.0) | 2 | 4 | |||||||
12 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 13.00 to 18.00 | 6 (10)Up to 24 | 3.0 to 30.0 (25.0) | 5 | |||||
13 | 14.00 to 20.00 | 7 (12)Up to 26 | 5.0 to 30.0 (25.0) | 2 | 5.5 | |||||||
16 | 17.00 to 27.00 | 8 (15)Up to 32 | 5.0 to 30.0 | 3 | 5 | 7 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 22.00 to 30.00 | 10 (15)Up to 40 | 5.0 to 30.0 | 9 |
[ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape
Config. | D | P | Mass (g) Ref. Value |
SUS304 Equivalent | |||
Round | 1 | 2 | 0.09 |
2 | 3 | 0.27 | |
4 | 0.4 | ||
3 | 4 | 0.79 | |
5 | 1.07 | ||
6 | 1.41 | ||
4 | 5 | 1.44 | |
6 | 1.86 | ||
5 | 6 | 2.93 | |
8 | 3.98 | ||
6 | 8 | 5.48 | |
10 | 7.28 | ||
8 | 10 | 11.05 | |
12 | 13.26 | ||
13 | 14.52 | ||
10 | 12 | 18.46 | |
13 | 20.03 | ||
15 | 23.55 | ||
12 | 13 | 24.18 | |
15 | 27.69 | ||
16 | 29.64 | ||
13 | 15 | 37.48 | |
16 | 39.43 | ||
16 | 20 | 60.49 | |
25 | 74.62 | ||
20 | 25 | 134.24 | |
30 | 160.14 | ||
Diamond | 2 | 3 | 0.18 |
4 | 0.29 | ||
3 | 4 | 0.55 | |
5 | 0.77 | ||
6 | 1.05 | ||
4 | 5 | 1.01 | |
6 | 1.34 | ||
5 | 6 | 2.29 | |
8 | 3.14 | ||
6 | 8 | 3.94 | |
10 | 5.36 | ||
8 | 10 | 8.81 | |
12 | 10.58 | ||
13 | 11.61 | ||
10 | 12 | 14.62 | |
13 | 15.87 | ||
15 | 18.75 | ||
12 | 13 | 18.98 | |
15 | 21.69 | ||
16 | 23.24 | ||
13 | 15 | 30.88 | |
16 | 32.39 | ||
16 | 20 | 49.29 | |
25 | 60.62 | ||
20 | 25 | 107.24 | |
30 | 127.74 |
Alterations
[NG] Alterations are not available for P Fixed Type
Alterations Code | Alteration Details | Application Conditions | Ordering Example | |||||||||||||||||||||||||||||||||
MH | Adds a tapped hole![]() | [ ! ] Applicable when D ≥ 6 [ ! ] B ≥ ℓ2 + 4
| SL-SFPBPA10-P11.01-L12-B6.4-MH | |||||||||||||||||||||||||||||||||
NTK | Adds a removal tap hole![]() | [ ! ] Applicable when D ≥ 6 [ ! ] Effective tap length of D depends on B dimension configurable range. [ ! ] When L + B + m ≤ M × 3, the tapped holes go through. [ ! ] When L + B + m ≤ M × 5, [NG] Not available in combination with MH or TC
| SL-SFPBPA10-P11.01-L12-B6.4-MTK | |||||||||||||||||||||||||||||||||
TC | Length of Tapered Point![]() | Changes the m dimension. TC = 1 mm Increments [ ! ] P/2-TC × tan15° (≒0.27) > 0.5 [ ! ] B dimension changes when TC is specified. [NG] Combination with NTK is not available
| SL-SFPBPA10-P11.01-L12-B6.4-TC5 | |||||||||||||||||||||||||||||||||
RC | Stem R Alterations![]() | Changes the relief to R0.5. [ ! ] Applicable when P - D ≥ 2 | SL-SFPBPA10-P11.01-L12-B6.4-RC |
Cleaning Process
Working Environment: General environment | ||||||
---|---|---|---|---|---|---|
![]() Alkaline warm pure water | ![]() | ![]() Pure water cleaning followed by ultrasonic pure water cleaning *3 times | ![]() | ![]() Dry | ![]() | ![]() Anti-rust single packing |
·Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
---|---|---|---|---|---|---|---|---|
![]() Hydrocarbon cleaning Ro water cleaning | ![]() | ![]() High-pressure jet washing (Ro water) followed by pure water (10MΩ·cm) cleaning | ![]() | ![]() Use pure water (13MΩ·cm) | ![]() | ![]() Use nitrogen blow | ![]() | ![]() Conducted on a clean bench in a Class 10 clean environment |
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
![]() Hydrocarbon cleaning Ro water cleaning | ![]() | ![]() Electrolytic polishing with an electrolytic polishing layer according to the material | ![]() | ![]() High-pressure jet washing (Ro water) followed by pure water (10MΩ·cm) cleaning | ![]() | ![]() Use warm pure water (13MΩ·cm) | ![]() | ![]() Use nitrogen blow | ![]() | ![]() Conducted on a clean bench in a Class 10 clean environment |
Packaging Example
For degreasing: (Part Number: SL-□□) ![]() | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□) ![]() [!] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for Use
Cleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
---|---|---|---|---|---|
Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
Post battery assembly process | |||||
Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number |
---|
SHD-SJPBPB1-2 |
Part Number | Minimum order quantity | Volume Discount | Days to Ship | Insertion Guide Tip Shape | Surface Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (Ø) | Mounting Side Tolerance | Cleaning Method | Mounting Section Length L (mm) | Locating Section Length B (mm) | Dimension Configurable Type | Material Certificate: Materials | Material Certificate: Surface Treatment |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 2 | 1 | p6 | Electrolytic Polishing + Precision Cleaning | 3 | 3 | P Selectable | SUS304 | Hard Chrome Plating |
Loading...
- 1
Basic Information
Basic Shape | Large Head | Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Clean Washed |
---|---|---|---|---|---|
Insertion Guide Tip Type | Tapered | Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) |
Heat Treatment | Not Provided | Locating Side O.D. Tolerance | 0/-0.01 | Material Certificate | Available |
Please check the type/dimensions/specifications of the part SHD-SJPBPB1-2 in the [Clean & Pack] Locating Pin - Large Head, Tapered, Press Fit series.
Specification/Dimensions
-
type
- SH-HFPBA
- SH-HFPBD
- SH-HFPBG
- SH-HFPBPA
- SH-HFPBPD
- SH-HFPDG
- SH-HJPBB
- SH-HJPBPB
- SH-HJPDB
- SH-HJPDPB
- SH-SFPBA
- SH-SFPBD
- SH-SFPBG
- SH-SFPBPA
- SH-SFPBPD
- SH-SFPDG
- SH-SJP
- SH-SJPBPB
- SH-SJPDB
- SH-SJPDPB
- SHD-SFPBA
- SHD-SFPBD
- SHD-SFPBG
- SHD-SFPBPA
- SHD-SFPBPD
- SHD-SFPDG
- SHD-SJP
- SHD-SJPBPB
- SHD-SJPDB
- SHD-SJPDPB
- SL-HFPBA
- SL-HFPBD
- SL-HFPBG
- SL-HFPBPA
- SL-HFPBPD
- SL-HFPDG
- SL-HJPBB
- SL-HJPBPB
- SL-HJPDB
- SL-HJPDPB
- SL-SFPBA
- SL-SFPBD
- SL-SFPBG
- SL-SFPBPA
- SL-SFPBPD
- SL-SFPDG
- SL-SJP
- SL-SJPBPB
- SL-SJPDB
- SL-SJPDPB
-
Insertion Guide Tip Shape
-
Round
-
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Hard Chrome Plating
-
Material
- Stainless Steel
- SUS304
- SUS304 Equivalent
- Stainless Steel
-
Locating Side Outer Dia. P (Ø)(mm)
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 20
- 25
- 30
-
Mounting Side Outer Dia. D(Ø)
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 16
- 20
-
Mounting Side Tolerance
- p6
- m6
- g6
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
-
Mounting Section Length L(mm)
- 3
- 4
- 5
- 10
- 15
- 22
- 30
-
Locating Section Length B(mm)
- 3
- 5
- 6
- 8
- 10
- 15
-
Dimension Configurable Type
- P Fixed Type
- P Selectable
- P, L, B Configurable
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 20 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
Part Number |
---|
SH-SJPBB10-15 |
SH-SJPBB12-13 |
SH-SJPBB12-15 |
SHD-SJPBPB10-12 |
SHD-SJPBPB10-13 |
SHD-SJPBPB10-15 |
Part Number | Minimum order quantity | Volume Discount | Days to Ship | Insertion Guide Tip Shape | Surface Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (Ø) | Mounting Side Tolerance | Cleaning Method | Mounting Section Length L (mm) | Locating Section Length B (mm) | Dimension Configurable Type | Material Certificate: Materials | Material Certificate: Surface Treatment |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 15 | 10 | m6 | Precision Cleaning | 15 | 10 | P Fixed Type | - | - | |
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 13 | 12 | m6 | Precision Cleaning | 15 | 10 | P Fixed Type | - | - | |
1 Piece(s) | Available | 12 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 15 | 12 | m6 | Precision Cleaning | 15 | 10 | P Fixed Type | - | - | |
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 12 | 10 | p6 | Electrolytic Polishing + Precision Cleaning | 15 | 10 | P Selectable | SUS304 | Hard Chrome Plating | |
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 13 | 10 | p6 | Electrolytic Polishing + Precision Cleaning | 15 | 10 | P Selectable | SUS304 | Hard Chrome Plating | |
1 Piece(s) | Available | 20 Day(s) or more | Round | Not Provided | [Stainless Steel] SUS304 Equivalent | 15 | 10 | p6 | Electrolytic Polishing + Precision Cleaning | 15 | 10 | P Selectable | SUS304 | Hard Chrome Plating |
Tech Support
- Technical Inquiry