SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (2024)

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (1)

IOG 2085.00 1

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

Dear Customer Estimado ClienteThank you for selecting our product. We are confident we can fully satisfy Muchas gracias por elegir nuestro producto. Estamos seguros que podemos your expectations by offering you a wide range of technologically advanced satisfacer completamente sus expectativas ofreciéndole una amplia variedad products which directly result from our many years of experience in faucet de productos tecnológicamente avanzados que resultan directamente de and fitting production. muchos años de experiencia en grifos y su producción apropiada.

ENGLISH~

ESPANOL

For care, use soft towel with soap and water only! Under nocirc*mstances should you use any chemicals. ATTENTION! ATENCIÓN! Para el cuidado, utilice solamente una toalla suave con jabón

y aqua! Bajo ninguna circunstancia no use productos químicos.

G 1/2”

G 1/2”

G 1/2” G 1/2”

G 1/2”

G 1/2”

~Ø6” (~Ø153mm)

~Ø10” (~Ø254mm)

Ø2-13/16” (Ø72mm)Ø2-13/16” (Ø72mm)

Ø2-9/16” (~Ø65mm)

Ø1/2”

(Ø12

mm)

Ø7-3/8”

(Ø187mm)

~Ø8” (~Ø203mm)

5” (1

27mm

)

4-3/4

” (12

0mm)

4-9/1

6” (1

16mm

)

5-9/1

6” (1

41mm

)

2-5/8

” (66

mm)

5” (1

28mm

)

84108405

8415

8420 8425

8430

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

Rev. 12 April 2014

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (2)

2

G 1/2” G 1/2” G 1/2”

G 1/2” G 1/2”

G 1/2” G 1/2”

G 1/2”

G 1/2”

G 1/2”

G 1/2”

Ø7-7/8” (Ø200mm)

Ø8-11/16” (Ø220mm)

Ø4-13/16” (Ø122mm) 3-3/4” (95mm)

Ø8” (Ø203mm)Ø6” (Ø152mm)

Ø10” (Ø254mm)

Ø8” (Ø203mm)

Ø6” (Ø152mm)

Ø10” (Ø254mm)

Ø4-5/16” (Ø110mm)

2-3/4

” (70

mm)

3-9/1

6” (9

0mm)

3-7/8

” (98

mm)

3-13

/16” (

97mm

)

3-9/1

6” (9

0mm)

4” (1

02mm

)

2-1/2

” (64

mm)

2-13

/16” (

72mm

)

2-13

/16” (

72mm

)

2-13

/16” (

72mm

)

4-5/1

6” (1

09mm

)

8440 8445

8450

8435

8452 8454

8456

8458

8437

8460

8462

ESPAÑOL

ENGLISH

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

adjustable wrench,strap wrench,Teflon® tape or plumbers putty.

ilave ajustable,ilave de correa,cinta adhesiva de Teflon® o masilla de plomería.

You should have the following tools:

Usted debe tener las herramientas siguientes:

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

Rev. 12 April 2014

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (3)

3

G 1/2” G 1/2”

G 1/2” G 1/2”

G 1/2”

G 1/2” G 1/2”

G 1/2”

Ø

Ø7-7/8” (Ø200mm)Ø6” (Ø152mm)

Ø10” (Ø253mm)Ø8” (Ø203mm)

Ø2-15/16” (Ø75mm)

Ø2-15/16”

(Ø75mm) Ø2-15/16”

(Ø74mm)

Ø2-15/16” (Ø75mm)

2-1/4

” (57

mm)

2-1/1

6” (5

3mm)

2-1/4

” (57

mm)

2-3/1

6” (5

6mm)

4-1/1

6” (1

04mm

)

3-15

/16” (

101m

m)

~4-1

/14” (

~108

mm)

~4-3

/16” (

~106

mm)

7/16”

(62m

m)

3/8” (

10mm

)

3/8” (

10mm

)9/1

6”

(14m

m)

1/2”

(13m

m)

ESPAÑOL

8438

8461

8431 8432

8434

8463

Shower Head - MultifunctionCabeza de regadera - multifunción

Shower Head - MultifunctionCabeza de regadera - multifunción

Shower Head - MultifunctionCabeza de regadera - multifunción

30° 30°

ENGLISH

SHOWERHEAD INSTALLATION

INSTALACIÓN EL CABEZAL DE LA REGADERA

see fig. 1a & 1b & 1c

vea fig. 1a y 1b & 1c

8436Shower Head - Multifunction

Cabeza de regadera - multifunción

Run hot and cold water through the shower arm to flush out dirt and debris.Apply thread sealant to the shower arm nipple.Thread the showerhead to the shower arm. Use a clean strap wrench to tighten the showerhead.Check the showerhead for smooth operation.

Abra el agua caliente y fría en el brazo de la regadera para eliminar cualquier desecho.Aplique sellador para rosca al niple del brazo de la regadera.Enrosque el cabezal al brazo de la regadera. Utilice una llave de correa para fijar el cabezal.Verifique que el cabezal de la regadera funcione adecuadamente.

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

ModelModelo

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

8457

Rev. 12 April 2014

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (4)

4

G 1/2” Ø1-3/16” (Ø30mm)

G 1/2” Ø1-3/16” (Ø30mm)

G 1/2” Ø1-3/16” (Ø30mm)

G 1/2” Ø1-3/16” (Ø30mm)

G 1/2” Ø1-3/16” (Ø30mm)

G 1/2” Ø1-3/16” (Ø30mm)

Ø9-13/16” (Ø250mm)

2-5/1

6” (5

8mm)

Ø11-13/16” (Ø300mm)

Ø15-3/4” (Ø

Ø

400mm)

Ø9-13/16” (Ø250mm)

2-5/1

6” (5

8mm)

2-5/1

6” (5

8mm)

2-5/1

6” (5

8mm)

Ø11-13/16” (Ø300mm)

2-5/1

6” (5

8mm)

Ø15-3/4” (Ø400mm)

2-5/1

6” (5

8mm)

8446 8447ModelModelo

ModelModelo

8448ModelModelo

8451 8453ModelModelo

ModelModelo

8455ModelModelo

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

Rev. 12 April 2014

7-7/8” (200mm)

1-7/8

” (48

mm)

8467 8469ModelModelo

ModelModelo

8473ModelModelo

G 1/2”

1-7/8

” (48

mm)

9-13/16” (250mm)

G 1/2”

G 1/2”

11-13/16” (300mm)

1-7/8

” (48

mm)

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (5)

5

8466 8468ModelModelo

ModelModelo

8474ModelModelo

8438 8439ModelModelo

ModelModelo

8464ModelModelo

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

Rev. 12 April 2014

8449 8471ModelModelo

ModelModelo

8472ModelModelo

Ø7-7/8” ( Ø200mm)

1-7/8

” (48

mm)

G 1/2”

Ø9-13/16” (Ø250mm)

G 1/2”

1-7/8

” (48

mm)

1-7/8

” (48

mm)

G 1/2”

Ø11-13/16” (Ø300mm)

7-11/16” ( 196mm)

2-1/4

” (57

mm)

G 1/2”

9-13/16” (250mm)

G 1/2”

2-1/4

” (57

mm)

2-1/4

” (57

mm)

G 1/2”

11-5/8” ( 295mm)

Ø7-15/16” ( Ø202mm)

2-1/4

” (57

mm)

G 1/2”

Ø9-15/16” (Ø252mm)

G 1/2”

2-1/4

” (57

mm)

2-1/4

” (57

mm)

G 1/2”

Ø11-15/16” ( Ø303mm)

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (6)

c

6

FIG.

Finished wallAcabado de la pared

EscutcheonChapetón

Shower arm (8520 Model)Brazo de regadera (Modelo 8520)

Showerhead (8420 Model)Cabezal de regadera (Modelo 8420)

FIG.

Finished wallAcabado de la pared

EscutcheonChapetón

Shower arm (8505 Model)Brazo de regadera (Modelo 8505)

Showerhead (8405 Model)Cabezal de regadera (Modelo 8405)

ESPAÑOLENGLISH

WARRANTY GARANTÍA

Graff products, Graff 3701 W. Burnham Street, Unit B Milwaukee, WI 53215 warrants to the purchaser that the materials and workman-ship of the product will be free from defects for the term of ownership for the original purchaser. The Graff ceramic cartridge, is warranted for the lifetime of the product. If at any time a valve mechanism should fail, Graff will provide a replacement part free of charge. A limited lifetime warranty for the finish is provided to the original purchaser of the Graff unit. This warranty does not apply to product that has been subject to abrasives, chemicals, scratches, dents, accidents, misuse, improper installation, alteration, or that has not received reasonable care. Purchaser should return any defective or non-conforming product to the factory, freight prepaid, at the above address. This warranty is limited to replacement parts only and does not include or cover labor charges or damage incurred in installation, replacement or repair or any consequential or incidental damages whatsoever, nor does it cover or include damages for property, personal injury or economic loss. Any damage to this Graff faucet as a result of improper installa-tion, neglect, accident, misuse or any use that violates the original instructions provided by us, WILL VOID THE WARRANTY. This warranty is valid to the original consumer purchaser and excludes commercial, industrial or business use of this Graff faucet.

Los productos de la Graff, Graff 3701 W. Burnham Street, Unit B Milwaukee, WI 53215, garantizan al comprador que los materiales y la ejecución de los productos están libres de defectos durante el periodo en que estén en posesión del comprador original. El cartucho cerámico de la Graff tiene una garantía vitalicia. Si en cualquier momento el mecanismo de la válvula resulte defectuoso, la Graff suministrará gratuitamente la pieza de recambio adecuada. El comprador original obtiene una garantía vitalicia para el acabado de los productos de la Graff. La presente garantía no será aplicada a los productos que hayan sido sometidos a la acción de productos abrasivos o químicos, los arańados, abollados, dańados en efecto de accidentes, explotación abusiva, instalación incorrecta, cambios o falta de conservación adecuada. El comprador deberá devolver todos los productos defectuo-sos odisconformes a la dirección de la fabrica antes indicada, enviándo-los por correo pagado por adelantado. La presente garantía está limitada únicamente a las piezas de recambio y no comprende ni cubre los gastos de mano de obra o dańos surgidos durante la instalación, recambio o reparación, ni cualesquiera dańos indirectos o incidentales; tampoco cubre las pérdidas en propiedad, dańos personales o pérdidas económicas. Cualquier dańo al mezclador de la Graff que resulte de su instalación inadecuada, negligencia, accidente, explotación abusiva o todo uso disconforme a las instrucciones suministradas por nosotros, INVALIDAN LA GARANTIA. La presente garantía será válida para el comprador / con-sumidor original y excluye el uso comercial, industrial o de negocios de los mezcladores de la Graff.

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

1/2"-14NPT

FIG.

Shower arm (8452 Model)Brazo de regadera

(Modelo 8452)

EscutcheonChapetón

Finished wallAcabado de la pared

Cabezal de regadera (Modelo 844 )6

6

Rev. 12 April 2014

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (7)

7

GENERAL GUIDLINES FOR PLANNING SHOWER SYSTEMINSTRUCCIONES GENERALES PARA PLANEAR EL SISTEMA DE LA DUCHA

ESPAÑOLENGLISH

CARE AND MAINTENANCE CUIDADO Y MANTENIMIENTO

Your Graff product is designed and engineered in accordance with the highest quality and performance standards. Be sure not to damage the finish during installation. Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. Never use abrasive cleaners, acids, solvents, etc. to clean any Graff product. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

Su producto de la Graff esta diseñado y dirigido acuerdocon los estándares de funcionamiento y calidad más altos. Esteseguro no dañar las terminaciones del grifo durante la instalación. Cuide el producto manteniendolo siempre limpio. Aunque suacabado es extrem-adamente durable, puede ser dañado por losabrasivos o pulientes ásperos. Nunca utilice limpiadoresabrasivos, ácidos, solventes, el etc. para limpiar cualquierproducto de la Graff. Para limpiar, simplemente use un paño húmedo y seque con una toalla suave.

C

E

F

G

H

D

B

AH

B

C

B

C

GB

C

G

C

F

E

B

A

B

D

C

C

C

F

E

B

A

C

F

E

B

A

C

Hand-Held Shower with Wall-Mount Slide BarDucha sostenidos con la mano desplazablemontada en la pared

1/2"Thermostatic Valve with Trim KitVálvula termostática 1/2" con el juego decorativo

1/2" Stop/Volume Control ValveVálvula reguladora de cierre 1/2"

Body SprayRociador corporal

Shower HeadCabeza de la ducha

Shower HeadCabeza de la ducha

Shower Arm with Escutcheon PlateCodo de la ducha con rosetón

Tub SpoutTubo de salida de la bańera

HandleManecilla

HandleManecilla

Shower ArmCodo de la ducha

3/4" Stop/Volume Control Valve Válvula reguladora de cierre 3/4"

3/4"Thermostatic Valve with Trim KitVálvula termostática 3/4" con el juego decorativo

Custom shower configuration for 3/4" thermostatic valve Configuración ejemplar de ducha para la válvula termostática 3/4"

Custom shower configuration for 1/2" thermostatic valve Configuración ejemplar de ducha para la válvula termostática 1/2"

All dimensions and drawings are for reference only. For details, please refer to actual products.Todas las dimensiones y dibujos sirven únicamente de referencia. Para consultar detalles, ver los productos.

IOG 2085.00

Installation Instructions Instrucciones de Instalación

SHOWERHEADSCABEZALES DE REGADERA

Rev. 12 April 2014

SHOWERHEADS CABEZALES DE REGADERA...IOG 2085.00 1 Installation Instructions Instrucciones de Instalación SHOWERHEADS CABEZALES DE REGADERA Dear Customer Estimado Cliente Thank you - [PDF Document] (2024)

FAQs

Are shower heads universal? ›

Selecting a New Shower Head

If you've selected a rain shower head, see How to Install a Rain Shower Head. Most shower head connections are now universal. However, always check the manufacturer's recommendations to ensure the head you're considering will fit your plumbing and for any tools needed for installation.

Do you have to turn off water to install new shower head? ›

You do not need to shut off the water to the house to change a shower head. Do all shower heads fit all showers? Yes, just about all shower heads have the same 1/2-inch NPT (national pipe tapered) size.

What tool do you use to install a shower head? ›

In order to effectively replace your shower head, you'll need a blanket or tarp, an adjustable wrench, a pair of slip-joint pliers, and a new shower head. It would also be beneficial to have teflon tape.

How to attach shower head to hose? ›

Apply thread sealant tape to the male threads of the inline shower head filter. Apply thread seal tape to all the male threads of the external shower diverter. Attach the external shower diverter valve to the shower arm pipe. Attach your shower head to the forward facing threads of the shower diverter.

Are shower heads easy to replace? ›

Yes! Changing out your showerhead can be a do it yourself job and we are going to help you do it. Luckily, it's pretty easy to replace a showerhead. Even if your current showerhead “works just fine”, upgrading is a job that can save you money on your energy and water bills.

Can you use WD-40 to loosen a shower head? ›

If your shower head gets stuck, try turning off the water supply and see if it loosens. If that doesn't work, you can use a lubricant like WD-40 to help loosen it up.

What pliers to use for shower head? ›

For removing showerheads and other chrome plated fittings - if you are discarding them - you can use more aggressive pipe wrenches or Channellock pliers. For installing new ones - start by hand tightening - then move to a quality adjustable wrench or pliers wrench.

How do I know what shower head will fit my shower? ›

What to measure:
  1. The size of the shower arm—that's the pipe coming out of the wall. ...
  2. The distance from the shower arm to the ceiling (if it's within about 2 feet).
  3. The length, width and height of your shower stall.
  4. The height of your shower head — the ideal height of your shower head should be between 77”-81”.

Do I need a plumber to install a shower head? ›

Saving water and money on bills is a great reason to replace a shower head if yours is particularly old. Interestingly, this task is one of the most straightforward DIY plumbing jobs you can handle in your home, plus it does not require any technical know-how to execute.

Do all shower heads fit every shower? ›

Shower Head Compatibility

Thankfully, yes. In the U.S. virtually every shower head has the same connection threading size, at ½” NPT. Be sure to read the installation instructions for the shower head you choose, too, and confirm whether you'll be able to do the upgrade yourself or if you'll need the help of a plumber.

Can I install a shower myself? ›

Many showers installed are prefabricated units, making installation an easy do-it-yourself project for homeowners with basic carpentry and plumbing skills.

Do you need thread seal tape for shower head? ›

It is always best to use teflon tape when installing a shower head and that's why we include it at no extra charge with every shower head we sell.

References

Top Articles
Latest Posts
Article information

Author: Carmelo Roob

Last Updated:

Views: 6187

Rating: 4.4 / 5 (45 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.